YW201HD SD/HD Integrated Receiver Decoder supports AVS+/H.265/H.264/MPEG2 decoding, RF/ASI/IP input, multiple resolutions including 1080P/1080I/720P/576I/480I, and audio formats such as DRA/AC3/EAC3/AAC/MPEG. Features Supports multiple input modes: RF / IP / ASI Rich interfaces: CVBS / HDMI / SD/HD-SDI / AES/EBU / analog stereo / ASI / IP Supports AVS+/H.265/H.264/MPEG2 decoding Dual independent CAM slots for descrambling two different signals Supports Biss_1/Biss_E descrambling Supports audio formats including DRA/AC3/EAC3/AAC/MPEG Compatible with HD and SD signals Resolution can be auto-detected or manually set User-friendly interface and easy-to-operate menu system; all functions can be controlled via LCD B/S-based Web network management Supports real-time monitoring of input signal strength, SNR, and signal unlock alarm
Technical Specifications RF Input | DVB-S/S2 Input | 1× RF input, 1× RF loop-through, 75Ω | Input Frequency | 950 ~ 2150 MHz | Input Level | -25 ~ -65 dBm | Symbol Rate | 1 ~ 45 Msps | FEC | All standard-compliant rates | LNB Power | 13V, 18V, Off, 22KHz | Constellation | QPSK, 8PSK | Roll-off Factor | 0.2, 0.25, 0.35 | DVB-T/T2 Input | 1× RF input, 1× RF loop-through, 75Ω | Input Frequency | 44 ~ 1002 MHz | Input Level | -20 ~ -100 dBm | Modulation | DVB-T: QPSK, 16/64 QAM; DVB-T2: QPSK, 16/64/256 QAM | Bandwidth | 6 / 7 / 8 MHz | Carrier Mode | DVB-T: 2K/8K; DVB-T2: 1K/2K/4K/8K/16K/32K | Guard Interval | DVB-T: 1/4, 1/8, 1/16, 1/32; DVB-T2: 1/4, 1/8, 1/16, 1/32, 1/64, 1/128 | FEC | DVB-T: 1/2, 2/3, 3/4, 5/6, 7/8; DVB-T2: 1/2, 3/5, 2/3, 3/4, 4/5, 5/6 | DVB-C Input | 1× RF input, 1× RF loop-through, 75Ω | Input Frequency | 48 ~ 862 MHz | Input Level | 45 ~ 75 dBuV | Modulation | 16/32/64/128/256 QAM | ASI Input & Output | Interface | 2× BNC, 75Ω | Standard | DVB-ASI, EN50083-9 | Output Bitrate | ≤ 200 Mb/s | Input Interface | 1× BNC, 75Ω | Standard | DVB-ASI, EN50083-9 | Input Bitrate | ≤ 120 Mb/s; 1-channel stereo | Video Decoder | Standard | MPEG-2 / MPEG-4 / H.264 AVC / H.265 (HEVC) / AVS+ | Audio Decoder | Standard | MPEG-1 Layer I/II, MPEG-2 Layer II, MPEG-2 AAC, MPEG-4 AAC LC 2.0/5.1CH, AC3/DRA/EAC3 | HD/SD-SDI Output | Interface | 2× BNC, 75Ω | SD-SDI Output | SMPTE 259M, 270 Mb/s (10bit) | HD-SDI Output | SMPTE 292M, 1.485 Gbit/s (20bit) | Output Level | 800mV ±20% p-p | Analog Audio Output | Interface | 2× BNC, 2× XLR | Audio Mode | Left, Right, Dual Mono, Stereo | Digital Audio Output | Interface | 1× AES/EBU | Analog Video Output | CVBS Interface | 1× BNC, 75Ω | Output Level | 1.0 Vp-p ±5% (standard test stream) | CVBS System | PAL B/D/G/H/I, PAL N, NTSC M, PAL N-C, NTSC M, NTSC M443, PAL M, SECAM, NTSC MJ | Video S/N Ratio | ≥ 56 dB | Sync Amplitude | 300 ± 20 mVp-p | Video Amplitude-Frequency Response | ±0.8 dB @ 4.8 MHz ±1 dB @ 4.8–5 MHz +0.5/–4 dB @ 5.5 MHz | Video Output Level | 700 ± 30 mVp-p | Differential Gain | ≤ 8% | Data Output | Subtitle | DVB/EBU | Closed Caption | EIA 608, EIA 708, EIA 608-to-708 | Local & Remote Management | Interface | 1× RJ-45, 10/100 Base-T NM | Remote Control | HTTP Web | Local Control | Front panel keys & LCD control | Firmware Upgrade | IP | Physical Specifications | Dimensions | 450 × 280 × 44 mm | Weight | Net weight: 5 kg | Power Supply | AC 90V ~ 250V, 50/60Hz | Power Consumption | 24W (without LNB power) | Operating Temperature | 0 ~ 45 ℃ | Storage Temperature | -10 ~ 60 ℃ | Humidity | 10 ~ 90% (non-condensing) |
|